Use dry, untreated hardwood: oak, hickory, apple or cherry cover most meats. Never burn painted, stained or chemically treated wood, and skip resinous softwoods such as pine. Penn State Extension says never to burn treated wood of any kind because it can release dangerous fumes. That guidance is written for heating with wood, so applying it to a smoker firebox is our reading, a cautious one.

Wood Types at a Glance

WoodSmoke character (as commonly described)Commonly paired with
OakMedium, earthy, rarely overpoweringBrisket, beef, all-purpose base
HickoryStrong, bacon-likePork shoulder, ribs, ham
MesquiteStrongest; use sparinglyShort cooks; blend with milder wood
AppleMild, sweetChicken, pork, turkey
CherryMild, fruityPoultry, pork, blends with oak

These are cooks’ and wood sellers’ descriptions, not measurements and not agency guidance, so treat them as starting points. Start with a small amount of strong wood and add more next time.

What Never Goes in the Smoker

  • Treated or painted wood: pressure-treated lumber, stained boards, painted trim and plywood.
  • Pine, spruce and other resinous softwood: Penn State Extension, writing about home heating, says to limit conifers like pine, fir and spruce because they can coat a chimney with tar, soot and creosote. Cooks also avoid them for a harsh, resinous taste, but we found no extension source on smoke flavor.
  • Pallets and scrap lumber: you cannot tell what they carried or were treated with. Penn State Extension says never to burn treated wood products, pallet parts included, and warns that pallets stamped MB were treated with a highly toxic pesticide (methyl bromide).
  • Damp or moldy wood: it smolders and gives harsh smoke. Use seasoned, dry wood.

Chunks vs Chips vs Pellets

Cooks commonly say chunks, roughly fist-sized, burn slowly and suit long cooks like brisket in a charcoal or offset smoker, while chips burn fast and suit short cooks or smoker boxes and may need refilling. Pellets are sized for pellet grills only; see best wood pellets for smoking and hardwood vs flavored blend pellets.

How Much Wood a Cook Needs

FSIS says smoking meat can take 4 to 8 hours. A common approach among cooks is a few chunks at the start and no more wood after about the midpoint. Check your smoker’s manual for how much wood it expects, since box size and airflow vary. For a different way to add smoke, see how to use a pellet smoker tube.

Match It to the Cooker

Safety

Burning wood and charcoal produces carbon monoxide. Never use a grill indoors or in a garage, breezeway, carport, porch or under a surface that will burn (CPSC). Keep the smoker away from the house, railings and branches (NFPA). Cook meat to the USDA FSIS temperature, such as 145°F with a 3 minute rest for whole cuts of beef, because smoke flavor tells you nothing about doneness. Let used ash and embers cool fully in a metal container with a lid.

FAQ

Can I use wood from my yard?

Only if you know the species and it has dried (seasoned). When you cannot identify the tree, or the wood was ever painted or treated, leave it out.

Can I mix woods?

Yes. A mild fruit wood with oak or hickory is a common blend, and it tames strong woods like mesquite.

Where does our advice come from?

Penn State Extension wood-burning and pallet guidance (applied to smokers by inference), USDA FSIS, CPSC and NFPA, plus common barbecue practice where we say so. We research and compare, and we do not use or review the products ourselves; see how we choose.

Changelog: November 2026: first published.