Table of Contents

4 sections 2 min read

An EVSE, short for electric vehicle supply equipment, is the equipment that delivers electricity from a wall circuit to an electric vehicle and signals when it is safe to start. The “charger” that converts AC to the battery’s DC lives inside the car; the box on your wall mostly supplies and controls power.

Why the Difference Matters

People say “EV charger” for the wall unit, the cord, and the car’s onboard charger. They are different parts. The EVSE sets the maximum amps offered, and the onboard charger sets the most the car will take. The slower one wins: a 48 A EVSE gives 240 x 48 = 11.52 kW, but a car with a 7.2 kW onboard charger still charges at 7.2 kW.

What It Is Made Of

  • A cable and connector, most often J1772 or NACS; see J1772 vs NACS.
  • Control and protection electronics that confirm the car is connected before power flows.
  • A hookup to the house: a plug into an outlet, or a hardwired connection to a dedicated circuit.

The Level 1 cordset provided with a vehicle is also an EVSE. AFDC describes Level 1 as that cordset plugged into an outlet on a dedicated branch circuit, and says a qualified electrician can add circuits for Level 2 (240 V).

Home Safety Basics

AFDC says the National Electrical Code treats EV charging as a continuous load (Article 625), and that permits may be required locally. Adding a 240 V circuit or hardwiring a unit is work for a licensed electrician, and AFDC mentions a certified electrical contractor; we do not give wiring steps.

Where to Go Next

Learn the speed tiers in what is Level 2 EV charging, then compare units in best Level 2 EV chargers for home.

Changelog: November 2026: first published.