The Kasa HS300 is the smart power strip to start with for most indoor setups: six separately switched outlets, three USB ports, per-outlet energy monitoring in the app, and a 1,875 W total load rating. If you only need to schedule a lamp, a router fan, and a charger, the three-outlet KP303 does the same switching in a smaller body. Outdoors, a weather-rated plug like the Tapo P400M is the right class of product, not an indoor strip.

Quick Comparison

ModelSwitched outletsMax loadEnergy monitoringLocationBest for
Kasa HS3006, plus 3 USB1,875 W (15 A)Yes, per outletIndoorDesk or media cabinet
Kasa KP3033, plus 2 USB1,875 W (15 A)Not listed by KasaIndoorSmall setups
Tapo P400M21,800 W (15 A)Not on the product pageOutdoor, IP65Patio and string lights
HBN outdoor stake615 A, 125 V (listing)Not listedOutdoor, IP44 (listing)Holiday lights

How We Chose

We kept strips and plugs that switch outlets individually over Wi-Fi, then ranked them on the maker’s published load rating, outlet count, energy monitoring, and rated location. The product pool is small: only two true smart strips were available, so the last two spots are outdoor smart plugs and the list has four entries, not five. Sources are TP-Link and Kasa product pages, listings, and verified buyer ratings. We research and compare; we do not use or review the products ourselves. See how we choose.

1. Kasa Smart Wi-Fi Power Strip HS300

  • Six independently controlled outlets and three USB ports (5 V, 2.4 A each, 4 A total), per Kasa’s page.
  • Energy use is tracked per outlet in the Kasa app, which is how you find the device that is quietly drawing power all night.
  • ETL-certified built-in surge protection, listed as a Type 3 SPD with a 500 V voltage protection rating; Kasa gives no joule rating. Two-year US warranty. The Wi-Fi is 2.4 GHz only.

Best for: a desk or entertainment center where you want schedules and usage numbers per device. See the best surge protectors for computers if you want surge ratings first.
Avoid if: your router or NAS must never lose power, or your network is 5 GHz only.

2. Kasa Smart Wi-Fi Power Strip KP303

  • Three individually controlled outlets and two always-on USB ports, with schedules and timers.
  • The same 15 A / 1,875 W total rating as the HS300, with ETL-certified surge protection and a 1,200 V clamping figure on Kasa’s page. The listing quotes a joule number that Kasa’s page does not, so we leave it out.
  • No energy monitoring on Kasa’s page. Two-year limited warranty, 2.4 GHz only.

Best for: a nightstand, a workbench, or a corner with three things to schedule.
Avoid if: you want per-device energy data; step up to the HS300.

3. Tapo P400M Outdoor Smart Plug

  • Two independent outlets, 15 A and 1,800 W, Matter-certified, so it can join Apple Home, Alexa, Google Home, or SmartThings.
  • IP65 rated, with a stated operating range of -4 to 122°F, per the TP-Link page.
  • 2.4 GHz Wi-Fi only. It is a plug, not a surge protector, so it does not replace one.

Best for: patio lights and a fountain pump on separate schedules.
Avoid if: you want a multi-outlet strip with surge protection.

4. HBN Outdoor Power Stake Timer

  • Six outlets on a ground stake with a 6 ft cord, 15 A and 125 V, per the listing.
  • The listing says IP44 and built-in overload protection; we found no maker page to confirm either.
  • Uses the Smart Life app on 2.4 GHz Wi-Fi. A stake with individual covers suits seasonal lighting, not year-round loads.

Best for: holiday lights spread across a yard.
Avoid if: you need a maker-documented rating before you leave it outside all winter.

Cost of Ownership

There is no battery or fuel; the cost is the strip, an app account, and your Wi-Fi. A smart strip also draws power itself, and the makers’ pages we read do not give a standby figure, so a plug-in watt meter is the way to check. Surge components wear down with use, and smart strips from these makers list a two-year warranty (Kasa) while the listing for the stake says one year.

How to Choose

  • How much will it carry? Add the watts. A 1,500 W space heater on a 1,875 W strip leaves 375 W, and heaters belong in a wall outlet anyway; see can you plug a space heater into a surge protector.
  • What is the standby saving? kWh per year = standby watts x hours off per day x 365 / 1,000. For a cabinet idling at 20 W for 16 hours a day: 20 x 16 x 365 / 1,000 = about 117 kWh. Measure your own load first.
  • Which devices should never be switched? Routers, NAS drives, and medical equipment should not sit behind a schedule. A drive cut off mid-write can lose data; for those, a UPS is the right tool (how long a UPS lasts).

Plug it into the wall. Check the Kasa or Tapo manual for limits on extension cords and other strips. For a UPS, Schneider Electric (APC) says to plug it directly into the wall receptacle and recommends against plugging a surge protector, power strip, or extension cord into a Back-UPS output, so keep a UPS out from behind a strip.

FAQ

Does a smart power strip work without Wi-Fi?

Kasa’s KP303 page lists on/off buttons on the strip (check your model), but app control, schedules, and voice control need the 2.4 GHz network.

Is a smart strip a good surge protector?

The Kasa strips are ETL-certified with built-in protection, but a joule rating is not published on the pages we read. If surge energy matters most, shop a dedicated surge protector.

Can I use an indoor strip outside?

No. Use a product the maker rates for outdoor use, and keep connections off wet ground.

Changelog: November 2026: first published.