A modern full-size refrigerator averages about 44 to 78 watts over a day, runs its compressor at an estimated 130 to 235 watts when it is on, and can briefly pull 2 to 3 times that to start. Those three numbers answer three different questions: how big a battery you need, how much continuous output you need, and whether the fridge will start at all.

Start with the load, not the backup equipment. The rest of this guide shows where each number comes from, using real ENERGY STAR listings, so you can repeat the math with the label on your own fridge.

Three Wattage Numbers, Three Jobs

A fridge has an average draw, a running draw, and a startup draw, and backup sizing needs all three. Watts (W) measure the rate of power at a given moment; watt-hours (Wh) measure the total energy used over time, the size of the tank you need.

  • Average watts decide battery size. The compressor cycles on and off, so the daily average sits well below the running figure.
  • Running watts decide continuous output. This is the draw while the compressor is actually turning.
  • Startup (surge) watts decide whether the compressor starts. The spike lasts a fraction of a second, but an undersized inverter will trip on it.

Average Watts From the EnergyGuide Label

The most reliable average comes from the annual kWh figure on the yellow EnergyGuide label or the ENERGY STAR product finder. Divide it by the 8,760 hours in a year to get average watts.

For a 20.0 cu ft Frigidaire GRTE2055A top-freezer without an automatic ice maker, ENERGY STAR lists 385 kWh per year (469 kWh for the version with an ice maker): 385,000 Wh / 8,760 h = about 44 W average, or 385 kWh / 365 days = about 1.05 kWh (1,055 Wh) per day. A 26.0 cu ft Frigidaire GRSN2620A side-by-side is listed at 605 kWh per year: 605,000 Wh / 8,760 h = about 69 W average, or about 1.66 kWh per day.

Wattage Estimates for Three Real Refrigerators

The table runs the same three formulas on three ENERGY STAR listings. Running watts use the Department of Energy rule of thumb that a fridge compressor runs about one third of the time, so running watts are roughly average watts x 3. Startup watts use the 2 to 3 times multiplier that power station makers commonly give for compressors; the column shows the high end, 3 times.

Refrigerator (ENERGY STAR listing)Style, sizeAnnual useAverage W (kWh x 1,000 / 8,760)Est. running W (average x 3)Est. startup W (running x 3)
Frigidaire GRTE2055ATop-freezer, 20.0 cu ft385 kWhabout 44 Wabout 132 Wabout 400 W
Frigidaire GRSN2620ASide-by-side, 26.0 cu ft605 kWhabout 69 Wabout 207 Wabout 620 W
Midea MRS26D7ASTSide-by-side, 26.3 cu ft686 kWhabout 78 Wabout 234 Wabout 700 W

Anker’s published planning table puts startup surges for modern top-freezers in the 400 to 1,200 W range and French-door models at 900 to 2,000 W, so treat the right-hand column as a floor, not a ceiling. Older fridges and models with an ice maker or water dispenser tend to sit higher.

Reading the Nameplate on Your Own Fridge

The nameplate sticker, usually inside the fresh-food compartment or on the back, gives a maximum draw, not a typical one. The DOE notes that the wattage listed on an appliance is the maximum power it draws.

If the plate lists amps only, convert with watts = amps x 120 V. A plate reading 6 A works out to 6 x 120 = 720 W. Use that as an upper bound for continuous output, then use the EnergyGuide annual kWh for energy planning.

Newer refrigerators with variable-speed (inverter) compressors break the one-third rule. They run longer at lower power, so the average x 3 method overstates their running watts. For those models, a plug-in watt meter on the outlet over a full 24 hours gives the best average, though most simple meters miss the brief startup spike.

Worked Example: Side-by-Side Fridge Plus Lights and Router

Take the 26.0 cu ft side-by-side from the table and add a router and two LED lamps, say 60 W combined from their labels. The backup source has to clear two checks.

  • Continuous output: 207 W running + 60 W = about 270 W. Nearly any power station or inverter generator clears this.
  • Surge output: 620 W startup + 60 W already on = about 680 W. Give it headroom: Anker’s published estimates run up to 1,200 W for top-freezers and 2,000 W for French-door models.
  • Daily energy: (69 W + 60 W) x 24 h = about 3,100 Wh if the lights and router stay on all day, which is the number that sets battery size.

So what: output is easy, energy is hard. A station like the Jackery Explorer 1000 v2, rated by Jackery at 1,500 W continuous and 3,000 W surge, handles the power side with room to spare, but its 1,070 Wh battery covers only part of that 3,100 Wh day. How long it lasts is covered in how long a power station will run a fridge.

Common Mistakes When Sizing for a Fridge

  • Multiplying the nameplate by 24 hours. 720 W x 24 h = 17,280 Wh, about 16 times the 1,055 Wh a day the top-freezer above is listed to use. That error leads people to buy far more battery than they need.
  • Sizing on running watts alone. A unit with enough continuous output can still shut down on the compressor’s startup spike. The difference is explained in running watts vs starting watts.
  • Confusing W and Wh. A 1,500 W station tells you what it can power at once; the Wh rating tells you for how long. See what a watt-hour is.
  • Forgetting the garage effect. A fridge in a hot garage runs its compressor more often than the label assumes, which raises the daily average.

Matching the Fridge to Backup Equipment

For a fridge-and-lights plan through an overnight outage, a battery power station is the simplest fit; our shortlist is in the best portable power stations for home backup. For multi-day outages, an inverter generator refills its energy budget with fuel; see the best inverter generators for home use.

Any fuel-burning generator produces carbon monoxide. The CPSC advises running it outdoors only, at least 20 ft from the home, far from windows, doors, and vents, with the exhaust pointed away from the home, never in a garage, basement, porch, or carport, and keeping battery-powered or battery-backup CO alarms on every level and outside sleeping areas. Follow the manufacturer’s manual and your local rules as well.

FAQ

How many watts does a mini fridge use?

Apply the same formula to its label: annual kWh x 1,000 / 8,760 gives average watts. Compact models usually list fewer kWh per year than full-size ones, so the average and running figures land lower, but the startup multiplier still applies.

Can a 1,000 W power station start a refrigerator?

Check the surge rating, not the 1,000 W figure. If the station’s surge rating clears your fridge’s estimated startup draw with headroom, it should start; the startup estimates in the table above run about 400 to 700 W for three current ENERGY STAR models.

Does a freezer use more watts than a fridge?

Per hour it depends on the model, so compare the annual kWh on each EnergyGuide label. The math is identical: annual kWh / 365 for daily use, then x 1,000 / 24 for average watts.

Changelog: November 2026: first published.