An average U.S. home needs about three 13.5 kWh home batteries to cover one full day of normal use, but a single battery is enough to carry a fridge, a freezer, internet, and a few devices for two days or more. The difference is the load you choose to back up. EIA puts the average residential customer at 10,791 kWh a year, which is 10,791 kWh / 365 days = about 29.6 kWh a day, and that one number drives most of the math below.

Start with the load, not the battery. A house that sheds its heating, cooling, and cooking during an outage can run on a small fraction of its normal daily energy, and the battery count drops with it.

The Formula: Two Limits, Take the Larger Count

A battery system has to pass two checks. Energy, measured in kilowatt-hours (kWh), is the size of the tank and decides how long the house runs. Power, measured in kilowatts (kW), is how much the system can deliver at one moment and decides what can run at the same time.

  • Energy count: batteries = (daily kWh x days of backup) / (usable kWh per battery x 0.9 planning margin).
  • Power count: batteries = largest set of loads running together (kW) / continuous kW per battery.
  • Your answer: whichever count is higher, rounded up to a whole battery.

The 0.9 planning margin is our own assumption, not a manufacturer figure. It leaves room for capacity fade over the warranty period and for the backup reserve most systems let you set in their app. If a spec sheet rates the battery in DC watt-hours rather than AC kWh, also multiply by 0.85, a common planning figure for inverter efficiency, to get energy at the outlet.

Usable Capacity and Output, From the Spec Sheets

Home batteries are sold in very different block sizes, so the same house can need one unit of one brand and seven of another. The table uses each maker’s published figures.

Battery (manufacturer spec)Usable energy per unitContinuous output per unitPlanning kWh (x 0.9)Expansion limit
Tesla Powerwall 313.5 kWh ACUp to 11.5 kW (5.8 to 11.5 kW by model)about 12.2 kWhUp to 4 units
FranklinWH aPower 215 kWh AC10 kW13.5 kWhUp to 15 units per aGate
Enphase IQ Battery 5P5.0 kWh3.84 kVA4.5 kWhStackable
EcoFlow DELTA Pro Ultra battery6,144 Wh DC (x 0.85 = about 5.2 kWh AC)7,200 W per inverterabout 4.7 kWhUp to 15 batteries, 3 inverters
12 V 100 Ah LiFePO4 battery12.8 V x 100 Ah = 1,280 Wh DC (x 0.85 = about 1.09 kWh AC)Set by the separate inverterabout 0.98 kWhDepends on the inverter system

The 12.8 V figure is the nominal voltage of a four-cell LiFePO4 pack: 4 cells x 3.2 V = 12.8 V. That row answers the common question about 100 Ah batteries, and it shows why a whole-house bank built from them gets large fast.

Worked Example 1: An Average Day, Whole House

Take the EIA average of about 29.6 kWh a day and plan for one full day. The energy count for each system is 29.6 kWh / planning kWh per unit, rounded up.

  • Tesla Powerwall 3: 29.6 / 12.15 = about 2.4, so 3 units.
  • FranklinWH aPower 2: 29.6 / 13.5 = about 2.2, so 3 units.
  • Enphase IQ Battery 5P: 29.6 / 4.5 = about 6.6, so 7 units.
  • EcoFlow DELTA Pro Ultra: 29.6 / 4.7 = about 6.3, so 7 batteries.
  • 12 V 100 Ah LiFePO4: 29.6 / 0.98 = about 30.2, so 31 batteries.

Now run the power count. If a central air conditioner, an electric range, and a well pump can all start in the same afternoon, the peak may sit well above one unit’s continuous rating. Three Enphase 5P units give 3 x 3.84 = about 11.5 kVA, roughly the same as one top-rated Powerwall 3, so in that case the energy count of seven still governs.

Worked Example 2: Essentials Only, Two Days

Most outage plans skip the big heating and cooling loads, which collapses the daily number. Here is an essentials budget built from published figures:

Load (source)MathPer day
26 cu ft side-by-side fridge, Frigidaire GRSN2620A (ENERGY STAR: 605 kWh/yr)605 kWh / 365about 1.66 kWh
15.7 cu ft chest freezer, GE FCM16DL (ENERGY STAR: 277 kWh/yr)277 kWh / 365about 0.76 kWh
Mesh router, eero 6+ (eero: 4.5 W)4.5 W x 24 habout 0.11 kWh
55 in TV, LG 55QNED85TU (ENERGY STAR on-mode: 76.9 W)76.9 W x 5 habout 0.38 kWh
Laptop with a 48 W adapter (ENERGY STAR listing, ASUS S5452M)48 W x 4 h, worst caseabout 0.19 kWh
Totalabout 3.1 kWh

Two days of essentials is 3.1 x 2 = 6.2 kWh. That is one Powerwall 3 (6.2 / 12.15 = about 0.5), one aPower 2, two Enphase 5P units (6.2 / 4.5 = about 1.4), two DELTA Pro Ultra batteries (6.2 / 4.7 = about 1.3), or seven 100 Ah LiFePO4 batteries (6.2 / 0.98 = about 6.3). Add lights, a furnace blower, or a sump pump from their own labels before you settle on a count.

What Changes the Count by the Most

  • Electric heat and central air. These loads are what separate the 3 kWh essentials day from the 30 kWh average day. Read the daily kWh off your utility bill for a winter month and a summer month, then decide which season you are sizing for.
  • Motor starting current. Tesla rates Powerwall 3 to start loads up to 185 A locked rotor amps (LRA), and FranklinWH lists the same 185 A LRA for aPower 2. Your air conditioner’s nameplate lists its LRA; if it is higher, you may need a soft starter or a second unit, a question for the installer.
  • Solar recharge. With panels, the battery only has to bridge the night and cloudy stretches, so days of backup can drop. Without solar, every extra day multiplies the count.
  • Partial vs whole-home backup. Installers can wire a battery to a backup subpanel with selected circuits. Fewer circuits means a smaller energy count and an easier power count.

Common Sizing Mistakes

  • Dividing the monthly bill by the battery. Monthly kWh / 30 gives an average day, but outage days are rarely average. Size for the season when outages hit your area.
  • Mixing DC and AC ratings. A 6,144 Wh DC battery and a 13.5 kWh AC battery are not compared on the same basis until you apply inverter losses.
  • Ignoring the power count. Plenty of kWh does not help if the system cannot start the well pump.
  • Treating a DIY 100 Ah bank as a drop-in. A battery bank needs an inverter, protection, and a code-compliant connection to the house. Any tie-in to your panel is work for a licensed electrician, with a permit and an inspection.

For how long a given setup lasts once the lights go out, see how long a home battery backup lasts in an outage. To compare the systems themselves, our whole-home battery backup options guide covers the main choices, and home battery backup cost covers what drives the price. If an essentials-only plan fits your house, a large plug-in unit may do the job; see large power stations for home backup. For the unit math, what a watt-hour is explains the basics.

Changelog: November 2026: first published.