Level 1 charging uses a standard 120 V outlet and adds roughly 4 miles of range per hour; Level 2 uses 240 V and adds roughly 23 to 35 miles per hour depending on the circuit. If you drive more than about 40 miles a day, Level 2 is the better fit. If you drive less and park next to a dedicated outlet, Level 1 may be enough.

We calculated every charging figure below from voltage and amps, so you can check each one with a calculator. Range per hour assumes 3 miles per kWh drawn from the wall, a round planning figure; your car’s efficiency will differ.

Quick Comparison

Level 1Level 2
Voltage120 V240 V
Typical current12 A (80% of a 15 A circuit)32 A to 48 A (circuit sized at 125%)
Power12 A x 120 V = 1.44 kW32 A x 240 V = 7.68 kW; 48 A x 240 V = 11.52 kW
Range per hour at 3 mi/kWhabout 4 milesabout 23 to 35 miles
Hours to add 60 kWh (no losses)60 / 1.44 = about 4260 / 7.68 = about 8; 60 / 11.52 = about 5
Added equipmentOften none: the cord that came with the carA Level 2 unit, plus a 240 V circuit if you lack one

What changes in daily life

Overnight range

A 12-hour night on Level 1 adds 1.44 kW x 12 h x 3 mi/kWh = about 52 miles. The same night on a 7.68 kW Level 2 circuit adds 7.68 x 12 x 3 = about 276 miles, which is more than most batteries need, so the car simply finishes early.

Battery size

Level 1 works when your daily driving is short. It struggles with a large battery that you regularly run low, because a 60 kWh pack needs about 42 hours from empty. Plug-in hybrids with small packs fill comfortably on Level 1.

Equipment and installation

The U.S. Department of Energy’s Alternative Fuels Data Center says Level 1 needs only a power outlet on a dedicated branch circuit near the parking spot, with no added equipment if the vehicle’s own cordset is used. For Level 2 it says some homes lack the electrical capacity and a qualified electrician can add circuits. It also notes that local permits may be required and that in many areas a site installation plan must be approved before installation. Level 2 equipment is a cost, and any electrical work for Level 2 comes on top.

Circuit work for a 240 V charger belongs to a licensed electrician working to the National Electrical Code and your local permit rules. We do not cover wiring steps on this site.

Power cuts and backup

A Level 2 charger on a 240 V circuit asks a lot of a backup source. A portable power station cannot supply 7.68 kW; read our guide on charging an EV during a power outage before you plan around it.

Choose Level 1 if

  • You drive under about 40 miles a day (40 / 3 = 13 kWh, or about 9 hours at 1.44 kW).
  • A dedicated outlet is already near your parking spot.
  • You want to spend nothing on equipment this year.

Choose Level 2 if

  • You drive long daily distances or have a battery above roughly 60 kWh.
  • Two drivers share one car and need a fast turnaround.
  • You want to use off-peak electricity hours, which a shorter charge window makes easier.

Our selection method covers how we weigh specs. Related: NEMA 14-50 vs hardwired and portable vs wall charger.

FAQ

Can I charge on Level 1 every night?

Yes, if the miles you drive fit the math. Multiply your daily kWh need by 1 divided by 1.44 to get hours. 13 kWh takes about 9 hours.

Does Level 2 always mean 240 V?

Yes. AFDC describes Level 2 equipment as running on 240 V.

Do I need a permit for Level 2?

Often. AFDC says appropriate permits may be required from local building and permitting authorities, so ask your electrician and city.

Changelog: November 2026: first published.