Clean a pellet grill when the grill is fully cold. Vacuum the ash from the fire pot, scrape the grates, remove built-up grease from the drip tray and grease path, and wipe the interior. Traeger recommends a deep clean about every 2 to 3 cooks, or every 20 to 24 hours of cook time, and says grease buildup is a fire risk.

Why Grease Matters

Traeger owner manuals state that grease fires come from not maintaining the grill and not cleaning the grease management system on a regular basis. Traeger manuals also warn that grease plugging the drain can cause one. NFPA tells grill owners to remove grease and fat buildup from the grates and from the trays below. Treat cleaning as a fire-safety job first and an appearance job second.

Before You Start

  • Turn the grill off, let it burn out and cool completely, and unplug it.
  • Work outdoors. Do not move a hot or dirty grill into a garage or enclosed space.
  • Check your manual. Models differ: Traeger lists extra grease parts to clean on Timberline and Ironwood grills (the Grease Governor, grease tube, and grease and ash keg).

Step by Step

  1. Grates: scrape and wipe them only when the surface is safe to touch; otherwise wait. Traeger advises against wire brushes, which can damage coated grates. Wash per your manual.
  2. Drip tray and heat baffle: remove them, discard greasy foil or liners, and scrape the tray.
  3. Ash: with the grill COLD, vacuum the fire pot and the area around it. Traeger calls a dedicated vacuum the best tool for the fire pot. Put the ash in a metal container, as NFPA advises for cooled coals.
  4. Interior: vacuum loose ash and sawdust, wipe with a cleaner your manual allows (Traeger suggests a non-chemical cleaner or diluted dish soap and water), then wipe dry.
  5. Grease path: clear the grease channel, chute, and drain tube or bucket. Traeger lists the grease chute for about every 6 months.
  6. Hopper: if you will not cook for a while, empty the pellets so moisture does not turn them to dust.
  7. Reassemble: baffle, tray with new liner, grates.

Schedule

WhenTask
After each cookScrape grates, check the grease bucket
Every 2 to 3 cooks or 20 to 24 hours of cooking (Traeger)Deep clean the interior and fire pot
Every 3 months (Traeger)Clean the exterior
Every 6 months (Traeger)Clean the grease chute

Brands vary; some third-party listings say to vacuum the pot every 3 to 5 uses, others after every use. Heavy fatty cooks like pork shoulder and bacon call for sooner cleaning than a few burger nights. Your manual wins.

Mistakes to Avoid

  • Vacuuming ash while it may still hold embers.
  • Letting grease pool in the tray, which feeds flare-ups.
  • Spraying electronics, the controller, or the probe jacks.
  • Using a cleaner your manual does not allow near food surfaces.

If a Grease Fire Starts

Keep the lid closed, shut the grill off, and keep your distance. If flames spread beyond the cooker or you are unsure, move everyone away and call 911. Never throw water on a grease fire. Keep children and pets at least 3 feet from the grill, per NFPA. Place the grill well away from the house, deck railings, and branches, and never run it in a garage or enclosed area.

For fuel use per cook, see how many pellets a pellet grill uses. A fire extinguisher near the cooking area is a sensible backup: best fire extinguishers for home. For how we weigh sources, see how we choose.

Changelog: November 2026: first published.