Makers say an infrared burner or emitter plate gives a gas grill a more even sear surface and fewer flare-ups. A traditional burner is simpler, and it does the work for most family cooking. Add infrared if searing steaks is the point of the grill, not if burgers and chicken are.

Side by Side

FactorTraditional gas burnerInfrared (emitter plate or sear burner)
How heat reaches foodFlame heats the air and the grateAn emitter plate absorbs the heat of the flames and radiates it to the food (Char-Broil)
Flare-upsDrippings can reach the flamePlate sits between flame and food, which Char-Broil says prevents flare-ups
Heat patternHot over burners, cooler betweenChar-Broil says it distributes heat evenly across the surface
Typical useAll-round grillingSearing, or a whole-grill infrared design
CleaningBurners and gratesPlate or emitter surface needs care too, so check your manual

Three Differences That Matter

Heat delivery

On a traditional grill, burner flames heat the air under the lid and the grate, and drippings can drop onto the flame. Char-Broil describes its TRU-Infrared design as an emitter plate above the heat source that absorbs the natural infrared heat of the flames, radiates it to the food, and, in the maker’s words, forms a barrier against flare-ups. Other makers use a separate infrared sear burner. Read the manual to see which design you are buying, because a sear burner is a single zone, while Char-Broil describes its plate as spreading heat across the grill surface.

Does it sear better?

Not automatically. Weber says to preheat a gas grill to 500 to 550°F before cooking, whatever the burner type. Grill forum posts on sear results are anecdotal, and we found no maker-published surface temperature that compares the two designs, so treat any surface temperature claim as a marketing number unless the manual lists it. What you can count is input per area. As a worked example with round inputs (not a specific grill), take a 12,000 Btu/h sear burner over a 100 sq in zone: 12,000 / 100 = 120 Btu/h per sq in. A 40,000 Btu/h main set over 450 sq in is 40,000 / 450 = about 89 Btu/h per sq in. Concentrated heat sits where the steak does.

Fuel use

Sear burners draw extra gas while lit. An example 12,000 Btu/h burner uses 12,000 / 91,452 = about 0.13 gallons of propane an hour (EIA propane, 91,452 Btu per gallon), or roughly 0.55 lb at 4.2 lb a gallon, a planning figure. Four minutes on a steak is 0.13 x 4 / 60 = about 0.009 gallons, a small slice of a 20 lb cylinder, which holds about 4.7 gallons (PERC).

Safety Notes for Both

  • Gas grills are for outdoors only. CPSC says never in a garage, breezeway, carport, or porch, or under anything that can burn.
  • Keep the grill well away from the house, railings, eaves, and overhanging branches, as NFPA advises, and open the lid before lighting a gas grill. Follow your manual for clearances.
  • Check connections with soapy water. If you smell gas, shut off the gas, do not light anything, and call your gas supplier or 911 from a safe distance.
  • Do not add an infrared burner or change fittings on your own. Use only a kit your grill maker lists, fitted as the manual says. An aftermarket part may affect the warranty.
  • Cook to USDA FSIS temperatures: 165°F poultry, 160°F ground meat, 145°F with a 3 minute rest for whole cuts of beef, pork, and lamb.

Choose Infrared If

  • You sear steaks or chops most weeks.
  • Flare-ups from fatty burgers and sausages annoy you.
  • You cook on a small grill and want strong heat in one spot.

Choose a Traditional Burner If

  • You mostly cook chicken, vegetables, and burgers at moderate heat.
  • You want a simpler burner design.
  • You already own a grill with a sear station and are happy with it.
  • Look elsewhere than infrared if you rarely sear, since the extra burner adds one more surface to clean.

FAQ

Can I add an infrared burner to my grill?

Only through a kit or accessory your maker lists for your model. Do not modify burners, orifices, or gas fittings yourself.

Do infrared grills still flare up?

Char-Broil says its plate design prevents flare-ups, but fat on a hot surface can still smoke, so keep the lid open and watch the food. Never walk away from a lit grill.

Should I pick infrared over charcoal for sear?

Compare fuel and effort in gas vs charcoal. If you cook on pellets, searing on a pellet grill is a different method. See how we choose for our research approach.

Changelog: November 2026: first published.