Level 1 charging uses a standard 120 V outlet and adds roughly 4 miles of range per hour; Level 2 uses 240 V and adds roughly 23 to 35 miles per hour depending on the circuit. If you drive more than about 40 miles a day, Level 2 is the better fit. If you drive less and park next to a dedicated outlet, Level 1 may be enough.
We calculated every charging figure below from voltage and amps, so you can check each one with a calculator. Range per hour assumes 3 miles per kWh drawn from the wall, a round planning figure; your car’s efficiency will differ.
Quick Comparison
| Level 1 | Level 2 | |
|---|---|---|
| Voltage | 120 V | 240 V |
| Typical current | 12 A (80% of a 15 A circuit) | 32 A to 48 A (circuit sized at 125%) |
| Power | 12 A x 120 V = 1.44 kW | 32 A x 240 V = 7.68 kW; 48 A x 240 V = 11.52 kW |
| Range per hour at 3 mi/kWh | about 4 miles | about 23 to 35 miles |
| Hours to add 60 kWh (no losses) | 60 / 1.44 = about 42 | 60 / 7.68 = about 8; 60 / 11.52 = about 5 |
| Added equipment | Often none: the cord that came with the car | A Level 2 unit, plus a 240 V circuit if you lack one |
What changes in daily life
Overnight range
A 12-hour night on Level 1 adds 1.44 kW x 12 h x 3 mi/kWh = about 52 miles. The same night on a 7.68 kW Level 2 circuit adds 7.68 x 12 x 3 = about 276 miles, which is more than most batteries need, so the car simply finishes early.
Battery size
Level 1 works when your daily driving is short. It struggles with a large battery that you regularly run low, because a 60 kWh pack needs about 42 hours from empty. Plug-in hybrids with small packs fill comfortably on Level 1.
Equipment and installation
The U.S. Department of Energy’s Alternative Fuels Data Center says Level 1 needs only a power outlet on a dedicated branch circuit near the parking spot, with no added equipment if the vehicle’s own cordset is used. For Level 2 it says some homes lack the electrical capacity and a qualified electrician can add circuits. It also notes that local permits may be required and that in many areas a site installation plan must be approved before installation. Level 2 equipment is a cost, and any electrical work for Level 2 comes on top.
Circuit work for a 240 V charger belongs to a licensed electrician working to the National Electrical Code and your local permit rules. We do not cover wiring steps on this site.
Power cuts and backup
A Level 2 charger on a 240 V circuit asks a lot of a backup source. A portable power station cannot supply 7.68 kW; read our guide on charging an EV during a power outage before you plan around it.
Choose Level 1 if
- You drive under about 40 miles a day (40 / 3 = 13 kWh, or about 9 hours at 1.44 kW).
- A dedicated outlet is already near your parking spot.
- You want to spend nothing on equipment this year.
Choose Level 2 if
- You drive long daily distances or have a battery above roughly 60 kWh.
- Two drivers share one car and need a fast turnaround.
- You want to use off-peak electricity hours, which a shorter charge window makes easier.
Our selection method covers how we weigh specs. Related: NEMA 14-50 vs hardwired and portable vs wall charger.
FAQ
Can I charge on Level 1 every night?
Yes, if the miles you drive fit the math. Multiply your daily kWh need by 1 divided by 1.44 to get hours. 13 kWh takes about 9 hours.
Does Level 2 always mean 240 V?
Yes. AFDC describes Level 2 equipment as running on 240 V.
Do I need a permit for Level 2?
Often. AFDC says appropriate permits may be required from local building and permitting authorities, so ask your electrician and city.
Changelog: November 2026: first published.