A pure sine wave inverter converts battery DC power into AC power whose voltage rises and falls in a smooth curve, the same shape as utility power (120 V at 60 Hz in U.S. homes), so motors, compressors, and electronics behave the way they do on the grid. A modified sine wave inverter approximates that curve with flat steps, which costs less to build but adds distortion.
For home backup, the waveform matters most for the loads you care about keeping on: a fridge compressor, a furnace blower, a sump pump, and medical devices such as a CPAP.
Pure Sine vs Modified Sine
The difference shows up as harmonic distortion, the extra higher-frequency content riding on the 60 Hz wave. Spec sheets report it as total harmonic distortion (THD), a percentage where lower means closer to grid power.
| Trait | Pure sine wave | Modified sine wave |
|---|---|---|
| Wave shape | Smooth curve, like utility power | Stepped, square-edged approximation |
| Harmonic distortion | Low | High |
| Motors and compressors | Run as designed | Run hotter, per inverter maker Samlex |
| Sensitive electronics, chargers, some medical devices | Generally compatible | May hum, misbehave, or refuse to run |
| Where you find it | Power stations that list it in the AC spec, inverter generators, quality standalone inverters | Low-cost plug-in car inverters and older or budget units |
Samlex America, which builds both types, explains that the high-frequency content in a modified sine wave increases heating in motors and microwaves and adds radio interference. A motor that runs hotter is also wasting energy, which comes straight out of your battery budget.
Why It Matters for Backup Power
Most loads worth backing up have a motor. A fridge compressor, a sump pump, and a furnace blower all run on AC motors, and those are the loads that suffer most on a stepped waveform. Check your CPAP or other medical device manual for its power requirements; some manufacturers specify pure sine wave output for inverter use.
The waveform does not change the energy math, but inverter losses do. A common planning figure is 0.85 inverter efficiency. For a fridge averaging 150 W on a 1,070 Wh pure sine station: 1,070 Wh x 0.85 / 150 W = about 6 hours. Our guide to how many watts it takes to run a refrigerator shows where the 150 W figure comes from, and the watt-hour explainer covers rated vs usable capacity.
How to Check What You Are Buying
- Look for “pure sine wave” in the AC output spec, rather than in marketing copy alone. Jackery’s Amazon listing for the Explorer 1000 v2, for example, states its three AC outlets are pure sine wave at 120 V and 60 Hz.
- Read the THD figure when one is published. A lower number means cleaner output.
- Check every outlet. A few products pair a pure sine AC port with a separate, cheaper inverter for another output.
- Match continuous and surge watts to your loads. A clean waveform does not help if the inverter cannot start the compressor.
Inverter Generators and Conventional Generators
Inverter generators use the same principle: the engine produces raw AC, the unit converts it to DC, and an inverter rebuilds clean AC. Conventional open-frame generators output AC straight from the alternator, and their waveform quality varies by model, so check the spec sheet before you plug in electronics. Our generator vs power station comparison weighs the wider trade-offs.
Any fuel-burning generator, inverter type included, produces carbon monoxide. Run it outdoors only, at least 20 feet from the home, far from windows, doors, and vents, with the exhaust pointed away from the home, per CPSC guidance, keep working CO alarms on every level and outside sleeping areas, and follow the manufacturer’s manual and local rules.
To shortlist equipment with pure sine output, compare the models in our best portable power stations for home backup and best inverter generators for home use guides.
Changelog: November 2026: first published.