Choose porcelain-coated cast iron if you want strong sear marks and no seasoning; choose stainless steel if you would rather not have a coating that can chip. Bare, uncoated cast iron holds heat well but needs seasoning and drying to stay rust-free.

Side by Side

FactorBare cast ironPorcelain-coated cast ironStainless steel
Heat retentionHighHigh (Weber: cast iron retains heat well)Varies with grate mass
SeasoningYes, with high-temperature oil (check your maker’s guide)No (Weber, Char-Broil)Not typically needed; follow your manual
Rust riskHigh if cleaned and left wetLow until the coating chipsLow
Coating damageNot applicableSharp tools can chip enamel (Weber)Not applicable
CleaningBrush, dry, re-oilBrush before each useBrush before each use

Three Differences That Matter

Heat and sear marks

Weber says cast iron retains heat well and gives a very hot cooking surface, which is what produces dark sear marks. Weber’s page credits cast iron, not stainless, with heat retention. Mass matters more than the label, so compare listed rod thickness or grate weight where a maker gives it.

Seasoning and rust

Bare cast iron is generally seasoned with a high-temperature oil, so follow your maker’s seasoning guide. Porcelain-coated cast iron does not need it: Weber says the enamel coating means the grates never need to be seasoned, and Char-Broil says porcelain grates do not require seasoning. Weber also says care is the same for porcelain-coated cast iron and stainless steel. Preheat to 500 to 550°F, brush with a stainless bristle brush, then set your cooking temperature. Brush before each use, and expect more sticking on new grates until they break in.

Durability

Porcelain only protects while it is intact. Weber advises against sharp-edged tools that can damage enamel and let corrosion start. A chipped spot exposes the iron below. Stainless has no coating to chip, though the grade varies by grill, so check the maker’s description. Char-Broil notes that rust risk is higher near water or in extreme weather, and recommends a well-fitting cover and keeping grates cleaned and oiled.

Care Rules to Follow

  • Brush with a bristle brush made for your grate type. Check the brush for loose bristles before each use, and replace it each year, as Weber advises.
  • Do not use a generic rust remover. Char-Broil warns it can leave chemical residue that could be toxic to food; its first step for rust is a baking soda and vinegar paste, left about 30 minutes, then rinsed with warm water.
  • Turn the gas off and let the grill cool before servicing any parts, and follow your manual.
  • If you smell gas, shut off the gas, do not light anything, and call your gas supplier or 911 from a safe distance.

Choose Cast Iron If

  • You sear steaks and want the heaviest, most heat-holding grate.
  • You are willing to brush and handle the coating carefully.
  • You pick the porcelain-coated version unless you want to season bare iron yourself.

Choose Stainless Steel If

  • You want to avoid a coating that can chip.
  • Your grill sits in a damp climate, where Char-Broil lists stainless or porcelain-coated grates as the rust-resistant picks.
  • Look elsewhere if you want the deepest sear marks and will care for the coating.
  • You mostly cook chicken, vegetables, and burgers rather than steaks.

FAQ

Is porcelain-coated cast iron the same as cast iron?

The core is cast iron, but the enamel shell changes the care: no seasoning, and a chip becomes the weak point. Bare cast iron has no coating and needs seasoning.

Can I swap grates on my grill?

Only with grates your maker lists for your model, so the fit and burner spacing stay correct. Check your manual before ordering.

Which grate helps with the sear?

Any grate sears when it is hot and clean. For more heat at the surface, see infrared vs traditional gas burners and gas vs charcoal. Our research method is in how we choose.

Changelog: November 2026: first published.