A Class K fire extinguisher is rated for fires in cooking appliances that involve combustible cooking media, meaning vegetable oils, animal oils, and fats. It uses a wet chemical agent. The U.S. Fire Administration (USFA) says Class K units are often found in commercial kitchens (restaurants, cafeterias, catering businesses).

How the wet chemical agent works

Amerex, a Class K maker, explains that the agent reacts with hot oil and grease in a process called saponification, turning the surface into a soapy foam. That foam cuts off oxygen and, per Amerex, also cools the fuel, which dry chemical does not do. Amerex adds that the class was created in the early 1990s after kitchen fire losses rose in the 1980s.

What NFPA 10 requires

NFPA 10, the portable extinguisher standard, says Class K units “shall be provided” where there is potential for fires involving combustible cooking media, and sets a maximum travel distance of 30 ft from the hazard to the extinguisher (sections 6.6.1 and 6.6.2, as quoted by Amerex). Those provisions are written for commercial kitchens. They are not a home requirement.

Class K vs. a multipurpose home extinguisher

Class KA-B-C or B-C multipurpose
FuelCooking oils and fats in appliancesMost types of home fires, per USFA
AgentWet chemicalDry chemical
Typical placeCommercial kitchensHomes

What a homeowner should do

  • If you keep a multipurpose extinguisher, make sure nothing blocks your reach to it, per USFA. Sizes and ratings are in fire extinguisher types explained.
  • For a pan fire, the first tool is a lid or baking sheet, per USFA. Steps are in how to put out a grease fire.
  • If you are unsure the fire is small and contained, leave and call 911 from a safe phone, per USFA.

Compare home models in our fire extinguisher guide. Follow the label and the manufacturer’s instructions on any unit you own.

Changelog: November 2026: first published.