A fire rating on a safe states how long its interior stays below a set temperature while the outside is exposed to a furnace fire, per Liberty Safe, a safe maker. A “1 hour, Class 350” label, for example, means the interior held at or below 350°F for one hour of fire exposure. Class 350 is the paper rating; lower classes protect media.

Two numbers on the label

ClassInterior stays belowMeant for
350350°FPaper documents
150150°F, humidity below 85%Magnetic tapes and film
125125°F, humidity below 80%Digital media

Source: Liberty Safe, a safe maker. The second number is the time, commonly 30 minutes, 1 hour, or 2 hours. Furnace temperatures often reach 1,200 to 1,700°F or more, per the same source, and vary with duration. SentrySafe lists some models, such as the 1170, as UL Classified for 1/2 hour at up to 1,550°F.

Extra checks behind a rating

Liberty Safe describes an explosion trial, where a safe goes into a furnace preheated to 2,000°F and must stay intact without bursting from trapped steam. It also describes an impact trial, where a heated safe is dropped from roughly 15 to 30 ft, reheated, and must stay locked. Burglary ratings are a separate scheme and say nothing about fire.

Read the claim, not the word “fireproof”

  • Look for the lab name (UL or Intertek/ETL) and the class. “Fire resistant” alone tells you little.
  • Match the class to the contents: 350 for papers, 125 for flash drives and discs.
  • A half-hour rating covers a short fire. Longer exposure needs a longer rating.
  • No rating is absolute protection; the rating covers one set of conditions, not every fire.

For the rated models we compared, see fireproof safes for documents, and for what else to store, the home emergency kit checklist.

Changelog: November 2026: first published.