A full 20 lb cylinder holds about 435,000 Btu of fuel, so it lasts roughly 14.5 hours on a 30,000 Btu/h grill running every burner wide open. Most cooks do not run that hard, so the real number is often longer. A 1 lb (16 oz) canister holds about 21,800 Btu, which is under an hour at the same rate.
The Formula
Run time in hours = fuel Btu in the container ÷ Btu per hour the grill burns. For the fuel side we use the EIA figure of 91,452 Btu per gallon of propane (a higher heating value) and a common planning density of 4.2 lb per gallon. That density is a rule-of-thumb figure, not a number any agency prints, so treat the results as estimates. Do not mix this with the lower heating value that DOE lists, 84,250 Btu per gallon; pick one set and stay with it.
- 20 lb cylinder: 20 lb ÷ 4.2 = 4.76 gal. 4.76 × 91,452 = about 435,000 Btu.
- 1 lb (16 oz) canister: 1 ÷ 4.2 = 0.238 gal. 0.238 × 91,452 = about 21,800 Btu.
Hours by Burner Rate
Find the grill’s total input rating on its data plate or in the manual. That is the Btu/h with every burner on high. The table divides the fuel above by common ratings and by a lower, more typical burn rate.
| Grill input (all burners, high) | 20 lb, full burn | 20 lb at half burn | 1 lb canister, full burn |
|---|---|---|---|
| 10,000 Btu/h (small portable) | 43.5 h | 87 h | 2.2 h |
| 30,000 Btu/h (2 to 3 burners) | 14.5 h | 29 h | 0.7 h (about 44 min) |
| 40,000 Btu/h (4 burners) | 10.9 h | 21.8 h | Not typical |
| 60,000 Btu/h (large, with side burner) | 7.3 h | 14.5 h | Not typical |
Half burn is an assumption for illustration, since knobs do not report a percentage.
A Worked Example
A four-burner grill rated 40,000 Btu/h, plus a 10,000 Btu/h side burner, draws up to 50,000 Btu/h if everything runs together. Suppose a Saturday cookout keeps the grill at an average of 60 percent of its main rating for 90 minutes: 40,000 × 0.60 × 1.5 = 36,000 Btu. A 20 lb cylinder holds 435,000, so that cookout uses about 8 percent of it. At one cookout a week, the cylinder lasts roughly 12 weeks.
How Much Is Left in the Cylinder?
A standard 20 lb cylinder weighs about 38 lb full and 18 lb empty, according to the Propane Education & Research Council. Weigh yours on a bathroom scale and subtract the empty (tare) weight, which is usually stamped on the collar. The remainder is propane in pounds. Under 4 lb is about 20 percent, roughly 87,000 Btu, which is under 3 hours on a 30,000 Btu/h grill at full burn. Store any spare away from the grill, as covered in how to store a propane tank safely.
Why Your Number May Differ
- Burners cycle with the lid up, wind, and cold air, so the average burn rate shifts.
- Input ratings come from the manufacturer and assume every burner on high.
- Cold weather lowers pressure inside the cylinder, which may affect performance before the fuel stops vaporizing (Generac support, written about generators). See gas grilling in winter.
- Natural gas grills have no cylinder; propane vs natural gas grills compares the two.
Safety With Cylinders
Use propane grills outdoors only, never in a garage, breezeway, carport, porch, or other enclosed space, because of fire and carbon monoxide risk (CPSC). Before a new fill, check the connections with soapy water; how to check a propane grill for leaks shows the steps. Never modify the regulator or valve.
FAQ
How long does a 16 oz propane tank last on a grill?
About 2 hours on a 10,000 Btu/h portable grill at full burn, and under an hour on a 30,000 Btu/h grill. The math is 21,800 Btu ÷ the grill’s Btu/h.
Does the 20 lb on the label mean 20 lb of fuel?
Yes. PERC lists the 20 lb cylinder as holding 20 lb of propane, with the steel body adding about 18 lb.
Changelog: November 2026: first published.