Divide amp hours by charger amps, then add a margin. Battery Tender gives the rule: a battery’s amp-hour (Ah) capacity divided by charger amperage is the approximate charge time from a fully discharged state. Its own example is a 70 Ah car battery on a 5 A charger, about 14 hours. Most batteries start partly charged, so real times run shorter.
The Formula
Hours = Ah removed x 1.2 / charger amps. The 1.2 is a planning allowance for charging losses that we chose, not a manufacturer figure. Ah removed is battery size times how far it is drawn down. The table uses a 70 Ah battery, the size in Battery Tender’s example.
| Charger | Half drained (35 Ah) | Fully drained (70 Ah) |
|---|---|---|
| 2 A | 35 x 1.2 / 2 = 21 h | 70 x 1.2 / 2 = 42 h |
| 5 A | 35 x 1.2 / 5 = 8.4 h | 70 x 1.2 / 5 = 16.8 h |
| 10 A | 35 x 1.2 / 10 = 4.2 h | 70 x 1.2 / 10 = 8.4 h |
At 2 Amps and at 10 Amps
At 2 A, a half-drained 70 Ah battery needs about a day. That is a maintainer’s job, and it is slow for a car you need Monday. At 10 A the same battery is done in roughly 4 hours, which fits a weekend morning. Battery Tender lists 5 A to 8 A for a sedan or SUV and 10 A for a diesel truck, and says too much amperage does not damage a battery when the charger is a smart one that regulates its own output.
Why the Last Stretch Is Slower
A smart charger tapers its current as the battery fills, then drops to float. Battery Tender notes that the absorption phase slows charging as the battery approaches full, so the plain division understates the total. Treat the table as a floor. Cold weather and an old battery push the number up.
Common Mistakes
- Assuming a dead battery is fully drained. Starting from 50% is more common, per Battery Tender.
- Using rated amps from a jump-start function as charge amps. They are not the same number.
- Charging in a closed space. Lead-acid batteries generate explosive gases, so NOCO’s user guide says to charge in a well-ventilated area, away from sparks and flame.
- Leaving a charger that has no float stage on for days. Use a maintainer or a charger with a float mode.
For clamp order and storage, read how to use a battery maintainer. For larger banks, the same division scales: a 200 Ah house bank at 40% depth of discharge is 80 Ah x 1.2 / 20 A, about 4.8 hours. Compare the chemistries in LiFePO4 vs lead-acid.
Changelog: November 2026: first published.