Charging time at home is the energy you need to add, in kWh, divided by the power reaching the battery, in kW. A standard 120 V outlet delivers about 1.44 kW, so adding 40 kWh takes roughly 28 hours. A 32 A Level 2 circuit delivers 7.68 kW, so the same 40 kWh takes about 5 hours. The pack size matters less than how much you actually use each day.
The formula
Power in kW is volts x amps / 1,000. Hours = kWh to add / kW. Chargers and batteries lose some energy as heat, so with an assumed 90% efficiency the real formula is hours = kWh / (kW x 0.9). The table below leaves losses out, so divide its hours by 0.9 for a cautious answer (28 becomes about 31). The 90% is an assumption, not a published rating for your car.
| Setup | Current | Power | Hours to add 40 kWh | Miles added per hour at 3 mi/kWh |
|---|---|---|---|---|
| Level 1, 120 V | 12 A (80% of a 15 A circuit) | 12 x 120 = 1.44 kW | 40 / 1.44 = about 28 | about 4 |
| Level 2, 240 V | 32 A | 32 x 240 = 7.68 kW | 40 / 7.68 = about 5.2 | about 23 |
| Level 2, 240 V | 40 A | 40 x 240 = 9.6 kW | 40 / 9.6 = about 4.2 | about 29 |
| Level 2, 240 V | 48 A | 48 x 240 = 11.52 kW | 40 / 11.52 = about 3.5 | about 35 |
The 3 miles per kWh figure is a round planning number. Your car’s window sticker or owner’s manual gives its real efficiency.
Work it out for your own driving
Start with daily miles, not battery size. If you drive 30 miles a day at 3 miles per kWh, you need 30 / 3 = 10 kWh back by morning. On Level 1 that takes 10 / 1.44 = about 7 hours, or about 7.7 hours with the 90% assumption. On a 7.68 kW Level 2 circuit it takes 10 / 7.68 = about 1.3 hours.
Filling a large pack from low is a different job. A 60 kWh pack at 1.44 kW needs 60 / 1.44 = about 42 hours, which is why Level 1 suits short commutes and plug-in hybrids better than a heavy daily driver.
What can slow you down
- The car’s onboard charger. It caps the AC power the vehicle accepts. If the manual lists 7.2 kW, a 48 A wall unit still delivers 7.2 kW to that car.
- The circuit. The National Electrical Code treats EV charging as a continuous load, so a 40 A charge rate needs a 50 A circuit (50 x 0.8 = 40). Our NEMA 14-50 vs hardwired guide walks through that math.
- Your charger’s setting. Many units let you lower the amps, and some cars let you cap the rate in the vehicle menu.
Common mistakes
- Using the battery’s total kWh instead of the kWh you need to add.
- Assuming a 48 A charger gives 48 A to every car.
- Planning on Level 1 for a long daily commute without doing the hours math.
The U.S. Department of Energy’s Alternative Fuels Data Center notes that an electrician can tell you whether your home has the electrical capacity for vehicle charging, and that permits may be required. We do not cover wiring here; a licensed electrician handles any 240 V circuit. For a side-by-side of the two levels, see Level 1 vs Level 2, and for outages read how to charge an EV during a power outage. Our scoring method is on how we choose.
FAQ
How long does it take to charge an EV overnight?
Over 12 hours, Level 1 adds 1.44 x 12 = about 17 kWh, or roughly 52 miles at 3 mi/kWh. A 7.68 kW Level 2 circuit adds 7.68 x 12 = about 92 kWh, more than most packs hold.
Does a bigger battery take longer to charge?
Only if you fill more of it. Time depends on kWh added and charging power, so a big pack topped up by 10 kWh takes as long as a small pack topped up by 10 kWh.
Is Level 1 enough?
Often, if your daily kWh divided by 1.44 fits the hours your car sits plugged in.
Changelog: November 2026: first published.