In winter the biggest gains come from removing sources and moving air out, in that order, with filtration last. EPA calls source control usually the most effective way to improve indoor air, and a closed-up house with too little fresh air lets whatever you cook, burn, or clean with build up.

Step 1: Control the sources

  • Fuel-burning appliances: EPA says unvented or malfunctioning appliances can release higher and sometimes dangerous levels of pollutants, and that an improperly adjusted gas stove can emit significantly more carbon monoxide. Have furnaces, water heaters, and gas stoves serviced by a qualified technician.
  • Never heat with the stove: Ready.gov says never to heat your home with a gas stovetop or oven.
  • Carbon monoxide alarms: CPSC advises an alarm on every level and outside sleeping areas. Our CO detector placement guide shows where, and best carbon monoxide detectors covers what to buy.
  • Cleaning products and air fresheners: EPA says products like air fresheners can release pollutants more or less continuously. Use less of them.

Step 2: Ventilate on purpose

EPA says bathroom and kitchen fans that vent outdoors remove contaminants directly from the room, and that opening windows helps dilute pollutants during activities like cooking. In winter, run the range hood while you cook, run the bath fan during a shower and for a while after, and crack a window briefly instead of leaving it open.

Sample math for a 1,500 sq ft home with 8 ft ceilings: volume = 1,500 x 8 = 12,000 cu ft. A 50 CFM bath fan running 30 minutes moves 50 x 30 = 1,500 cu ft, or 1,500 / 12,000 = 12.5 percent of the house volume. The fan rating on the label is a maker figure, so read it on your own unit.

Step 3: Keep humidity in range

EPA advises keeping indoor humidity below 60 percent, ideally 30 to 50 percent, and says an inexpensive humidity meter from a hardware store will tell you where you stand. Window condensation and a musty basement are signs to act. A hygrometer costs little, and the basement humidity guide covers the lower level. Vent dryers outside, as EPA also advises.

Step 4: Add filtration last

EPA says air cleaners are generally not designed to remove gases, and that its CADR rating system is for particles only. It also says filtration does not replace source control and ventilation. A portable cleaner helps with dust and smoke particles. ENERGY STAR’s sizing chart pairs a 300 sq ft room (8 ft ceilings) with a minimum CADR of 195, which works out to about two-thirds of the room area. Avoid any unit that intentionally produces ozone. Our dehumidifier vs air purifier guide explains which problem each one solves.

Common mistakes

  • Buying a purifier to fix a gas-stove or humidity problem. Fix the source first.
  • Sealing every gap without any mechanical ventilation. EPA says that with little infiltration, natural ventilation, or mechanical ventilation, the air exchange rate is low and pollutant levels can increase.
  • Expecting an air cleaner to deal with radon. EPA does not recommend air cleaners for that.
  • Skipping the furnace filter change. Check the filter size and the maker’s interval.

If you rely on fuel heat during outages, read carbon monoxide safety during power outages too.

Changelog: November 2026: first published.