Put a smoke alarm inside every bedroom, outside each separate sleeping area such as the hallway, and on every level of the house, basement included. NFPA also says to mount each one on the ceiling or high on a wall, and to keep it at least 10 feet (3 meters) from the stove.

The placement map

LocationAlarm?Why, per the source
Inside every bedroomYesNFPA: every sleeping room
Hallway outside bedroomsYesNFPA: outside each separate sleeping area
Every level, including the basementYesNFPA: on every level of the home
Kitchen and bathroomsNoNFPA FAQ: do not put alarms in kitchens or bathrooms
Within 10 ft of the stoveNoNFPA: at least 10 ft (3 m) from the stove to cut nuisance alarms

NFPA adds that large homes may need extra alarms, and that interconnected alarms are best: when one sounds, they all sound. A closed bedroom door may slow the spread of smoke and heat, so an alarm in the hallway alone does not replace one inside the room.

Ceiling or wall: how high

NFPA says “on the ceiling or high on a wall” because heat and smoke rise. Its installation guide adds numbers. A wall-mounted alarm should have its top no more than 12 inches (30.5 cm) from the ceiling, which matches First Alert’s 12 inches. On a pitched ceiling, mount it near the highest point, 4 to 12 inches (10 to 30.5 cm) from the wall. On an A-frame ceiling, mount it 4 to 12 inches from the peak. In a basement, put it near the bottom of the stairs, not the top, where dead air by the closed door could keep smoke from reaching it. For any other ceiling shape, follow the placement diagram in your alarm’s manual.

Count your alarms: a worked example

Formula: bedrooms + one per separate sleeping-area hallway + one for each other level.

  • Two-story, 3 bedrooms upstairs, finished basement: 3 bedrooms + 1 upstairs hallway + 1 main level + 1 basement = 6 alarms.
  • Ranch, 2 bedrooms, no basement: 2 bedrooms + 1 hallway = 3 alarms. The hallway alarm covers the only level.
  • Studio apartment: 1 alarm near the sleeping area, away from the kitchen, plus whatever your lease or local code adds.

Treat the count as a floor. Local code and the manufacturer’s instructions can ask for more.

Near the kitchen: pick the right sensor

NFPA explains that ionization alarms respond faster to flaming fires and photoelectric alarms respond faster to smoldering ones. It calls photoelectric the best type to install near the kitchen and bathrooms to reduce nuisance alarms, and it suggests multi-criteria alarms (the box says “helps reduce cooking nuisance alarms”) when you replace old units. If cooking keeps setting off the hallway alarm, change the sensor type before you think about silencing or removing it.

Mistakes that leave a room unprotected

  • Skipping the basement. It counts as a level.
  • Alarms only in the hallway. NFPA wants one inside each bedroom too.
  • Moving the alarm because it chirps or false-alarms. Find the cause first. NFPA’s installation guide says smoke alarms fail most of the time because of missing, disconnected, or dead batteries.
  • Ignoring the manual. NFPA tells owners to check the manufacturer’s instructions for the best spot.

Hardwired alarms are different from battery models: NFPA says only qualified electricians should install them. A battery alarm you mount yourself with the supplied bracket and the manual’s template.

What to do next

Walk the house with the table above and count what is missing. Our smoke and carbon monoxide combo comparison covers what to buy, and smoke detector vs CO detector explains why the two sensors are placed differently. Pair alarms with the right fire extinguisher and a practiced exit plan. NFPA notes you may have as little as 2 minutes to escape a fire.

Changelog: November 2026: first published.