Table of Contents

4 sections 2 min read

A grill BTU rating is the amount of fuel energy, in British thermal units per hour, the burners can consume at full input. It measures how much gas the grill uses, not how hot the food gets. The EIA defines one Btu as the heat needed to raise one pound of liquid water by 1°F.

What the Number Tells You

Weber explains that the rating shows how much fuel a grill uses in a given period, and it says BTUs “should be of no concern” when choosing one of its grills. Weber also argues that on some high-rated grills much of the heat leaves through a wide rear vent. A big number can mean a hungry grill, not a hotter one. Check whether the figure covers only the main burners or also side and sear burners, which a maker may list separately.

BTU per Square Inch

Dividing input by primary cooking area gives a fairer comparison. These are round example grills, not specific models:

Example grillInput (Btu/h)Primary cooking areaBtu/h per sq in
Small portable10,000150 sq in67
Three burner36,000450 sq in80
Four burner40,000450 sq in89

The formula is input divided by square inches. Use the same basis for both numbers, such as main burners and primary grate only, and compare grills built for the same fuel.

From Btu/h to Propane

At full input, a 40,000 Btu/h grill burns 40,000 / 91,452 = about 0.44 gallons of propane an hour (EIA). At a common planning figure of 4.2 lb per gallon, that is roughly 1.8 lb an hour, so a 20 lb cylinder lasts about 11 hours of full burn. Real cooking runs lower, as worked out in how long a 20 lb tank lasts.

Changelog: November 2026: first published.