It depends on how the camera gets its power and its connection. A plug-in camera stops when the outlet dies, a battery camera keeps recording, and almost every camera loses remote viewing and phone alerts if the router or modem goes dark.

What happens, by camera type

Camera setupRecords during an outage?Alerts and live view?What it needs
Plug-in Wi-Fi cameraNoNoBackup power at the outlet and at the router
Battery Wi-Fi cameraYes, on its own batteryUsually no, once the router is offPowered router and modem
Wired PoE camera with recorderNo, unless the switch and recorder have backup powerOnly if the router also has backup powerUPS or battery for switch, recorder, router
Cellular (4G LTE) cameraYes, on battery or solarYes, over the cellular linkA data plan

Reolink’s own explainer says plug-in cameras stop without electricity, battery cameras keep detecting and recording motion, and a battery camera without cellular may not give you phone viewing or push alerts during an outage. Its 4G LTE model is described as working without electricity or Wi-Fi.

Why the router matters as much as the camera

Your phone talks to the camera through the home internet link. If the modem and router lose power, the camera may still record to its card or hub, but it cannot reach you. Cloud-only plans cannot save new clips while the link is down, so local storage matters. Ring’s support pages show the same pattern for its Alarm Pro: on its internal battery it turns off most functions and Wi-Fi to save energy, and each Ring Power Pack (up to three can be connected) provides up to eight hours of backup power for the base station and eero extenders.

Sizing a backup for a wired system

Add up the load. A sample setup: four PoE cameras at 5 W each = 20 W, a recorder and switch at 25 W, and a modem and router at 15 W (Champion lists routers at 10 to 20 W), for 60 W total. A 500 Wh battery with an assumed 0.85 inverter efficiency lasts 500 x 0.85 / 60 = about 7 hours. Those wattages are planning figures; read your own labels. UPS runtime does not scale in a straight line, so check the maker’s runtime chart before you buy. Our UPS for modem and router guide and what a UPS is cover the basics, and UPS mode on a power station covers the bigger option.

Reconnecting afterward

Some owners posting in Ring’s community forum say their cameras stayed offline after power returned until they were power-cycled or reset. Those are individual owner reports from forum threads, not Ring documentation, and not every owner has this problem. Power the modem and router first and let them settle before restarting cameras.

For the rest of your outage plan, see how to prepare for a power outage.

Changelog: November 2026: first published.