A smoke alarm senses smoke particles in the air, and a heat alarm senses temperature, so they are not the same device and one does not stand in for the other in a bedroom or hallway. Install smoke alarms where NFPA places them. Add a heat alarm only in a spot where smoke would cause constant false alarms or conditions are too harsh for a smoke alarm, such as a garage.
Side by side
| Smoke alarm | Heat alarm | |
|---|---|---|
| Senses | Smoke particles | Temperature |
| Example | Ionization or photoelectric models | Kidde HD135F: sounds if temperatures rise above 135°F (maker page) |
| Where NFPA puts it | Inside each bedroom, outside each sleeping area, every level including the basement | NFPA’s consumer smoke alarm guidance names no heat alarm locations |
| Kitchen | Keep at least 10 ft from the stove | Used where smoke alarms would false-alarm; check the manual |
| Garage or unfinished space | First Alert’s manual (SM100V-AC) advises avoiding garages, crawl spaces, and unfinished attics | Kidde: usable in most homes and attached garages |
Why one does not replace the other
Different warning
A heat alarm sounds only when it senses a set temperature, not when smoke appears, so it is a poor stand-in for the alarm that wakes a sleeper. NFPA’s consumer smoke alarm page does not describe a heat alarm as a substitute for the smoke alarms it lists for bedrooms and hallways.
Different job
A heat alarm earns its place where smoke alarms struggle. A First Alert smoke alarm manual (SM100V-AC) says to avoid garages, crawl spaces, and unfinished attics, and any area colder than 40°F or hotter than 100°F, such as porches and non-air-conditioned crawl spaces. Kidde says its HD135F can be used in most homes and attached garages, and that if local code requires heat detection in an attic, you need a spot-type heat detector instead.
Example: a house with an attached garage
Count the smoke alarms first: 3 bedrooms + 1 hallway + 1 main floor + 1 basement = 6. The garage adds a heat alarm, so the house has 6 smoke alarms and 1 heat alarm, and the garage unit does not count toward the 6.
Choose a smoke alarm if / Choose a heat alarm if
- Choose a smoke alarm if the spot is a bedroom, hallway, basement, or living area. This is where early warning matters.
- Choose a heat alarm if the spot is an attached garage or another space where dust, exhaust, or temperature swings would trigger a smoke alarm, and your local code or manual allows it.
- Avoid if you were planning a heat alarm as the only device in a bedroom or hallway: it is not the right choice there.
- Ask your fire marshal first about kitchens and attics, because local code can require specific devices there.
For sensor types, see photoelectric vs ionization smoke alarms. Where heat and gas risks overlap, carbon monoxide detector vs smoke detector explains the third device.
FAQ
Is a heat alarm the same as a smoke alarm?
No. A heat alarm reacts to temperature (the Kidde HD135F sounds above 135°F), while a smoke alarm reacts to smoke particles.
Can I put a heat alarm in the kitchen instead of a smoke alarm?
Use the maker’s manual and local code. NFPA advises placing smoke alarms at least 10 feet from the stove, which reduces cooking nuisance alarms without giving up smoke detection.
Do heat alarms need replacing?
Follow the maker’s replacement guidance in the manual. Kidde lists a 5-year limited warranty on the HD135F.
Changelog: November 2026: first published.