Table of Contents

4 sections 3 min read

A camera keeps recording during an outage only if every link in its power chain has backup: the camera, the switch or router it talks to, and the recorder. Put a UPS or power station on the router and recorder, pick PoE or battery cameras, and expect cloud alerts to stop if the modem loses power.

SetupWhat needs backupResult in an outage
Battery or solar cameraWi-Fi router and modemCamera runs on its battery; alerts and remote view need the router
PoE camera plus recorder (NVR)NVR and PoE switch, then routerLocal recording continues; remote view needs the router
Plug-in Wi-Fi cameraCamera, router and modemDark unless on a UPS or power station

Cellular backup keeps alerts alive when the internet drops, but check whether your system’s plan is paid and that the base station itself has a battery.

Size the backup

Runtime in hours = battery Wh x 0.85 / load W. The 0.85 inverter figure is a common planning number, not a spec. Example load, a labeled assumption: router 15 W plus NVR 10 W plus four PoE cameras at 6 W each (24 W) plus a hard drive at 5 W is an assumed 54 W (15 + 10 + 24 + 5). A 1,024 Wh power station, a generic size, gives 1,024 x 0.85 / 54 = about 16 hours. I did not find a published power rating for the kit’s recorder, so read the NVR’s manual and measure your own load with a plug-in meter.

Use a UPS for short blips and a power station when the outage runs hours. Both are covered in what is a UPS and UPS for a modem and router. For long outages see power stations with UPS mode.

Which cameras suit which plan

The Reolink 8-channel PoE kit records to a 2 TB drive that the listing says holds about ten days, and the cameras draw power through the NVR, so only the NVR needs backup. The Ring Outdoor Cam (Stick Up Cam) Battery runs on a rechargeable pack, but its listing describes setup over Wi-Fi, so live view and alerts depend on the router. The eufy SoloCam E42 kit has removable solar panels and records to a HomeBase 3 that plugs into a power adapter, so the HomeBase needs backup too.

Common mistakes

  • Putting the camera on a UPS but not the router.
  • Skipping the PoE switch, which carries the cameras’ power.
  • Never using a generator indoors, in a garage or near windows: run it outdoors at least 20 ft from the home, far from windows, doors and vents, with the exhaust pointed away from the home, and keep CO alarms on every level and outside sleeping areas (CPSC).
  • Plugging a generator into a wall outlet to feed the house, called backfeeding, which CPSC calls extremely dangerous to utility workers and neighbors. Fixed connections are a job for a licensed electrician.

Resetting after power returns is in how to reset a security camera, and the basics are in do security cameras work without power. Protect gear from surges with the surge protector guide.

Changelog: November 2026: first published.